BRepOffsetAPI.i

/*
Copyright 2008-2025 Thomas Paviot (tpaviot@gmail.com)

This file is part of pythonOCC.
pythonOCC is free software: you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

pythonOCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License
along with pythonOCC.  If not, see <http://www.gnu.org/licenses/>.
*/
%define BREPOFFSETAPIDOCSTRING
"BRepOffsetAPI module, see official documentation at
https://dev.opencascade.org/doc/occt-7.9.0/refman/html/package_brepoffsetapi.html"
%enddef
%module (package="OCC.Core", docstring=BREPOFFSETAPIDOCSTRING) BRepOffsetAPI


%{
#ifdef WNT
#pragma warning(disable : 4716)
#endif
%}

%include ../common/CommonIncludes.i
%include ../common/ExceptionCatcher.i
%include ../common/FunctionTransformers.i
%include ../common/EnumTemplates.i
%include ../common/Operators.i
%include ../common/OccHandle.i
%include ../common/IOStream.i
%include ../common/ArrayMacros.i


%{
#include<BRepOffsetAPI_module.hxx>

//Dependencies
#include<Standard_module.hxx>
#include<NCollection_module.hxx>
#include<BRepBuilderAPI_module.hxx>
#include<TopoDS_module.hxx>
#include<gp_module.hxx>
#include<Message_module.hxx>
#include<TopTools_module.hxx>
#include<Draft_module.hxx>
#include<Geom_module.hxx>
#include<GeomAbs_module.hxx>
#include<BRepFill_module.hxx>
#include<BRepOffset_module.hxx>
#include<BRepPrimAPI_module.hxx>
#include<GeomFill_module.hxx>
#include<Law_module.hxx>
#include<Approx_module.hxx>
#include<Bnd_module.hxx>
#include<AppParCurves_module.hxx>
#include<MAT_module.hxx>
#include<TColgp_module.hxx>
#include<BRepAlgo_module.hxx>
#include<FEmTool_module.hxx>
#include<TopOpeBRepBuild_module.hxx>
#include<Plate_module.hxx>
#include<Bisector_module.hxx>
#include<TColStd_module.hxx>
#include<PLib_module.hxx>
#include<BRepMAT2d_module.hxx>
#include<TColGeom2d_module.hxx>
#include<BRepAdaptor_module.hxx>
#include<BRepClass3d_module.hxx>
#include<BRep_module.hxx>
#include<BRepTools_module.hxx>
#include<Quantity_module.hxx>
#include<Adaptor3d_module.hxx>
#include<TopLoc_module.hxx>
#include<AdvApp2Var_module.hxx>
#include<TColGeom_module.hxx>
#include<IntSurf_module.hxx>
#include<Message_module.hxx>
#include<Convert_module.hxx>
#include<Intf_module.hxx>
#include<TShort_module.hxx>
#include<TopOpeBRepDS_module.hxx>
#include<Poly_module.hxx>
#include<TopOpeBRepTool_module.hxx>
#include<Extrema_module.hxx>
#include<Geom2d_module.hxx>
#include<IntCurveSurface_module.hxx>
#include<GeomAdaptor_module.hxx>
#include<Geom2dAdaptor_module.hxx>
#include<BRepBuilderAPI_module.hxx>
#include<GeomPlate_module.hxx>
#include<Adaptor2d_module.hxx>
#include<Geom_module.hxx>
#include<BRepAlgo_module.hxx>
#include<ChFiDS_module.hxx>
#include<TColgp_module.hxx>
#include<TColStd_module.hxx>
#include<TCollection_module.hxx>
#include<Storage_module.hxx>
%};
%import Standard.i
%import NCollection.i
%import BRepBuilderAPI.i
%import TopoDS.i
%import gp.i
%import Message.i
%import TopTools.i
%import Draft.i
%import Geom.i
%import GeomAbs.i
%import BRepFill.i
%import BRepOffset.i
%import BRepPrimAPI.i
%import GeomFill.i
%import Law.i
%import Approx.i

%pythoncode {
from enum import IntEnum
from OCC.Core.Exception import *
};

/* public enums */
/* end public enums declaration */

/* python proxy classes for enums */
%pythoncode {
};
/* end python proxy for enums */

/* handles */
/* end handles declaration */

/* templates */
%template(BRepOffsetAPI_SequenceOfSequenceOfReal) NCollection_Sequence<TColStd_SequenceOfReal>;

%extend NCollection_Sequence<TColStd_SequenceOfReal> {
    %pythoncode {
    def __len__(self):
        return self.Size()
    }
};
%template(BRepOffsetAPI_SequenceOfSequenceOfShape) NCollection_Sequence<TopTools_SequenceOfShape>;

%extend NCollection_Sequence<TopTools_SequenceOfShape> {
    %pythoncode {
    def __len__(self):
        return self.Size()
    }
};
/* end templates declaration */

/* typedefs */
typedef NCollection_Sequence<TColStd_SequenceOfReal> BRepOffsetAPI_SequenceOfSequenceOfReal;
typedef NCollection_Sequence<TopTools_SequenceOfShape> BRepOffsetAPI_SequenceOfSequenceOfShape;
typedef BRepBuilderAPI_Sewing BRepOffsetAPI_Sewing;
/* end typedefs declaration */

/*********************************
* class BRepOffsetAPI_DraftAngle *
*********************************/
class BRepOffsetAPI_DraftAngle : public BRepBuilderAPI_ModifyShape {
	public:
		/****** BRepOffsetAPI_DraftAngle::BRepOffsetAPI_DraftAngle ******/
		/****** md5 signature: b9af936a89856f8fb520f412bc5baac1 ******/
		%feature("compactdefaultargs") BRepOffsetAPI_DraftAngle;
		%feature("autodoc", "Return
-------
None

Description
-----------
Constructs an empty algorithm to perform taper-adding transformations on faces of a shape. Use the Init function to define the shape to be tapered.
") BRepOffsetAPI_DraftAngle;
		 BRepOffsetAPI_DraftAngle();

		/****** BRepOffsetAPI_DraftAngle::BRepOffsetAPI_DraftAngle ******/
		/****** md5 signature: 0e4d1cafe2cf2c602b747516c3fa76bf ******/
		%feature("compactdefaultargs") BRepOffsetAPI_DraftAngle;
		%feature("autodoc", "
Parameters
----------
S: TopoDS_Shape

Return
-------
None

Description
-----------
Initializes an algorithm to perform taper-adding transformations on faces of the shape S. S will be referred to as the initial shape of the algorithm.
") BRepOffsetAPI_DraftAngle;
		 BRepOffsetAPI_DraftAngle(const TopoDS_Shape & S);

		/****** BRepOffsetAPI_DraftAngle::Add ******/
		/****** md5 signature: 4ce7b2535b631733771b79ec806daaad ******/
		%feature("compactdefaultargs") Add;
		%feature("autodoc", "
Parameters
----------
F: TopoDS_Face
Direction: gp_Dir
Angle: float
NeutralPlane: gp_Pln
Flag: bool (optional, default to Standard_True)

Return
-------
None

Description
-----------
Adds the face F, the direction Direction, the angle Angle, the plane NeutralPlane, and the flag Flag to the framework created at construction time, and with this data, defines the taper-adding transformation. F is a face, which belongs to the initial shape of this algorithm or to the shape loaded by the function Init. Only planar, cylindrical or conical faces can be tapered: - If the face F is planar, it is tapered by inclining it through the angle Angle about the line of intersection between the plane NeutralPlane and F. Direction indicates the side of NeutralPlane from which matter is removed if Angle is positive or added if Angle is negative. - If F is cylindrical or conical, it is transformed in the same way on a single face, resulting in a conical face if F is cylindrical, and a conical or cylindrical face if it is already conical. The taper-adding transformation is propagated from the face F along the series of planar, cylindrical or conical faces containing F, which are tangential to one another. Use the function AddDone to check if this taper-adding transformation is successful. Warning Nothing is done if: - the face F does not belong to the initial shape of this algorithm, or - the face F is not planar, cylindrical or conical. Exceptions - Standard_NullObject if the initial shape is not defined, i.e. if this algorithm has not been initialized with the non-empty constructor or the Init function. - Standard_ConstructionError if the previous call to Add has failed. The function AddDone ought to have been used to check for this, and the function Remove to cancel the results of the unsuccessful taper-adding transformation and to retrieve the previous shape.
") Add;
		void Add(const TopoDS_Face & F, const gp_Dir & Direction, const Standard_Real Angle, const gp_Pln & NeutralPlane, const Standard_Boolean Flag = Standard_True);

		/****** BRepOffsetAPI_DraftAngle::AddDone ******/
		/****** md5 signature: 225f23d0ffea018222bcb24ee9311796 ******/
		%feature("compactdefaultargs") AddDone;
		%feature("autodoc", "Return
-------
bool

Description
-----------
Returns true if the previous taper-adding transformation performed by this algorithm in the last call to Add, was successful. If AddDone returns false: - the function ProblematicShape returns the face on which the error occurred, - the function Remove has to be used to cancel the results of the unsuccessful taper-adding transformation and to retrieve the previous shape. Exceptions Standard_NullObject if the initial shape has not been defined, i.e. if this algorithm has not been initialized with the non-empty constructor or the .Init function.
") AddDone;
		Standard_Boolean AddDone();

		/****** BRepOffsetAPI_DraftAngle::Build ******/
		/****** md5 signature: 58900897d55d51e349b2e40a091ec26f ******/
		%feature("compactdefaultargs") Build;
		%feature("autodoc", "
Parameters
----------
theRange: Message_ProgressRange (optional, default to Message_ProgressRange())

Return
-------
None

Description
-----------
Builds the resulting shape (redefined from MakeShape).
") Build;
		virtual void Build(const Message_ProgressRange & theRange = Message_ProgressRange());

		/****** BRepOffsetAPI_DraftAngle::Clear ******/
		/****** md5 signature: ae54be580b423a6eadbe062e0bdb44c2 ******/
		%feature("compactdefaultargs") Clear;
		%feature("autodoc", "Return
-------
None

Description
-----------
Cancels the results of all taper-adding transformations performed by this algorithm on the initial shape. These results will have been defined by successive calls to the function Add.
") Clear;
		void Clear();

		/****** BRepOffsetAPI_DraftAngle::ConnectedFaces ******/
		/****** md5 signature: be55b5929554f7dfde3eec1b9ab3f977 ******/
		%feature("compactdefaultargs") ConnectedFaces;
		%feature("autodoc", "
Parameters
----------
F: TopoDS_Face

Return
-------
TopTools_ListOfShape

Description
-----------
Returns all the faces which have been added together with the face <F>.
") ConnectedFaces;
		const TopTools_ListOfShape & ConnectedFaces(const TopoDS_Face & F);

		/****** BRepOffsetAPI_DraftAngle::CorrectWires ******/
		/****** md5 signature: 81ca023a91873cfa63a02fb08e0cbd78 ******/
		%feature("compactdefaultargs") CorrectWires;
		%feature("autodoc", "Return
-------
None

Description
-----------
No available documentation.
") CorrectWires;
		void CorrectWires();

		/****** BRepOffsetAPI_DraftAngle::Generated ******/
		/****** md5 signature: 12bed2c8d73d25dddf738c72a9352693 ******/
		%feature("compactdefaultargs") Generated;
		%feature("autodoc", "
Parameters
----------
S: TopoDS_Shape

Return
-------
TopTools_ListOfShape

Description
-----------
Returns the list of shapes generated from the shape <S>.
") Generated;
		virtual const TopTools_ListOfShape & Generated(const TopoDS_Shape & S);

		/****** BRepOffsetAPI_DraftAngle::Init ******/
		/****** md5 signature: 5b69b32485b3d9f82ae4abb9c853c3c7 ******/
		%feature("compactdefaultargs") Init;
		%feature("autodoc", "
Parameters
----------
S: TopoDS_Shape

Return
-------
None

Description
-----------
Initializes, or reinitializes this taper-adding algorithm with the shape S. S will be referred to as the initial shape of this algorithm.
") Init;
		void Init(const TopoDS_Shape & S);

		/****** BRepOffsetAPI_DraftAngle::Modified ******/
		/****** md5 signature: 73ccfe97b4ed94547a190332224ffe23 ******/
		%feature("compactdefaultargs") Modified;
		%feature("autodoc", "
Parameters
----------
S: TopoDS_Shape

Return
-------
TopTools_ListOfShape

Description
-----------
Returns the list of shapes modified from the shape <S>.
") Modified;
		virtual const TopTools_ListOfShape & Modified(const TopoDS_Shape & S);

		/****** BRepOffsetAPI_DraftAngle::ModifiedFaces ******/
		/****** md5 signature: cd09c09ae96bda548c679db0e897d478 ******/
		%feature("compactdefaultargs") ModifiedFaces;
		%feature("autodoc", "Return
-------
TopTools_ListOfShape

Description
-----------
Returns all the faces on which a modification has been given.
") ModifiedFaces;
		const TopTools_ListOfShape & ModifiedFaces();

		/****** BRepOffsetAPI_DraftAngle::ModifiedShape ******/
		/****** md5 signature: 52b70a5b01905688e2ddbc00ab060e3c ******/
		%feature("compactdefaultargs") ModifiedShape;
		%feature("autodoc", "
Parameters
----------
S: TopoDS_Shape

Return
-------
TopoDS_Shape

Description
-----------
Returns the modified shape corresponding to <S>. S can correspond to the entire initial shape or to its subshape. Raises exceptions Standard_NoSuchObject if S is not the initial shape or a subshape of the initial shape to which the transformation has been applied.
") ModifiedShape;
		virtual TopoDS_Shape ModifiedShape(const TopoDS_Shape & S);

		/****** BRepOffsetAPI_DraftAngle::ProblematicShape ******/
		/****** md5 signature: 4b993ee84b1645cd4a03936d51cfc6ec ******/
		%feature("compactdefaultargs") ProblematicShape;
		%feature("autodoc", "Return
-------
TopoDS_Shape

Description
-----------
Returns the shape on which an error occurred after an unsuccessful call to Add or when IsDone returns false. Exceptions Standard_NullObject if the initial shape has not been defined, i.e. if this algorithm has not been initialized with the non-empty constructor or the Init function.
") ProblematicShape;
		const TopoDS_Shape ProblematicShape();

		/****** BRepOffsetAPI_DraftAngle::Remove ******/
		/****** md5 signature: 2dda97e74bdcd077a8ecce9d227e7fa7 ******/
		%feature("compactdefaultargs") Remove;
		%feature("autodoc", "
Parameters
----------
F: TopoDS_Face

Return
-------
None

Description
-----------
Cancels the taper-adding transformation previously performed by this algorithm on the face F and the series of tangential faces which contain F, and retrieves the shape before the last taper-adding transformation. Warning You will have to use this function if the previous call to Add fails. Use the function AddDone to check it. Exceptions - Standard_NullObject if the initial shape has not been defined, i.e. if this algorithm has not been initialized with the non-empty constructor or the Init function. - Standard_NoSuchObject if F has not been added or has already been removed.
") Remove;
		void Remove(const TopoDS_Face & F);

		/****** BRepOffsetAPI_DraftAngle::Status ******/
		/****** md5 signature: 26dc5cff0cd2168b2136c6f9bb9e099c ******/
		%feature("compactdefaultargs") Status;
		%feature("autodoc", "Return
-------
Draft_ErrorStatus

Description
-----------
Returns an error status when an error has occurred (Face, Edge or Vertex recomputation problem). Otherwise returns Draft_NoError. The method may be called if AddDone returns Standard_False, or when IsDone returns Standard_False.
") Status;
		Draft_ErrorStatus Status();

};


%extend BRepOffsetAPI_DraftAngle {
	%pythoncode {
	__repr__ = _dumps_object
	}
};

/*****************************************
* class BRepOffsetAPI_FindContigousEdges *
*****************************************/
class BRepOffsetAPI_FindContigousEdges {
	public:
		/****** BRepOffsetAPI_FindContigousEdges::BRepOffsetAPI_FindContigousEdges ******/
		/****** md5 signature: fd7a2ffb22004077f79a7dae2c0d118b ******/
		%feature("compactdefaultargs") BRepOffsetAPI_FindContigousEdges;
		%feature("autodoc", "
Parameters
----------
tolerance: float (optional, default to 1.0e-06)
option: bool (optional, default to Standard_True)

Return
-------
None

Description
-----------
Initializes an algorithm for identifying contiguous edges on shapes with tolerance as the tolerance of contiguity (defaulted to 1.0e-6). This tolerance value is used to determine whether two edges or sections of edges are coincident. Use the function Add to define the shapes to be checked. Set option to false. This argument (defaulted to true) will serve in subsequent software releases for performing an analysis of degenerated shapes.
") BRepOffsetAPI_FindContigousEdges;
		 BRepOffsetAPI_FindContigousEdges(const Standard_Real tolerance = 1.0e-06, const Standard_Boolean option = Standard_True);

		/****** BRepOffsetAPI_FindContigousEdges::Add ******/
		/****** md5 signature: e2be6f2074943772e403ebcbe671347a ******/
		%feature("compactdefaultargs") Add;
		%feature("autodoc", "
Parameters
----------
shape: TopoDS_Shape

Return
-------
None

Description
-----------
Adds the shape shape to the list of shapes to be checked by this algorithm. Once all the shapes to be checked have been added, use the function Perform to find the contiguous edges and the function ContigousEdge to return these edges.
") Add;
		void Add(const TopoDS_Shape & shape);

		/****** BRepOffsetAPI_FindContigousEdges::ContigousEdge ******/
		/****** md5 signature: 528f0ebefe61a096548f88451970603d ******/
		%feature("compactdefaultargs") ContigousEdge;
		%feature("autodoc", "
Parameters
----------
index: int

Return
-------
TopoDS_Edge

Description
-----------
Returns the contiguous edge of index index found by the function Perform on the shapes added to this algorithm. Exceptions Standard_OutOfRange if: - index is less than 1, or - index is greater than the number of contiguous edges found by the function Perform on the shapes added to this algorithm.
") ContigousEdge;
		const TopoDS_Edge ContigousEdge(const Standard_Integer index);

		/****** BRepOffsetAPI_FindContigousEdges::ContigousEdgeCouple ******/
		/****** md5 signature: 783b24657c04ecf4547ffd8cfddcc368 ******/
		%feature("compactdefaultargs") ContigousEdgeCouple;
		%feature("autodoc", "
Parameters
----------
index: int

Return
-------
TopTools_ListOfShape

Description
-----------
Returns a list of edges coincident with the contiguous edge of index index found by the function Perform. There are as many edges in the list as there are faces adjacent to this contiguous edge. Exceptions Standard_OutOfRange if: - index is less than 1, or - index is greater than the number of contiguous edges found by the function Perform on the shapes added to this algorithm.
") ContigousEdgeCouple;
		const TopTools_ListOfShape & ContigousEdgeCouple(const Standard_Integer index);

		/****** BRepOffsetAPI_FindContigousEdges::DegeneratedShape ******/
		/****** md5 signature: e6eb24cfb41ed6276abbd22e81382ad4 ******/
		%feature("compactdefaultargs") DegeneratedShape;
		%feature("autodoc", "
Parameters
----------
index: int

Return
-------
TopoDS_Shape

Description
-----------
Gives a degenerated shape.
") DegeneratedShape;
		const TopoDS_Shape DegeneratedShape(const Standard_Integer index);

		/****** BRepOffsetAPI_FindContigousEdges::Dump ******/
		/****** md5 signature: 15b4b2e195645aebb43170ff7f15952a ******/
		%feature("compactdefaultargs") Dump;
		%feature("autodoc", "Return
-------
None

Description
-----------
Dump properties of resulting shape.
") Dump;
		void Dump();

		/****** BRepOffsetAPI_FindContigousEdges::Init ******/
		/****** md5 signature: dd6c1b1cc9e67e536ec1bfeda1eb7f2d ******/
		%feature("compactdefaultargs") Init;
		%feature("autodoc", "
Parameters
----------
tolerance: float
option: bool

Return
-------
None

Description
-----------
Initializes this algorithm for identifying contiguous edges on shapes using the tolerance of contiguity tolerance. This tolerance value is used to determine whether two edges or sections of edges are coincident. Use the function Add to define the shapes to be checked. Sets <option> to false.
") Init;
		void Init(const Standard_Real tolerance, const Standard_Boolean option);

		/****** BRepOffsetAPI_FindContigousEdges::IsDegenerated ******/
		/****** md5 signature: 84979167278e746e62a21a790a7cd87e ******/
		%feature("compactdefaultargs") IsDegenerated;
		%feature("autodoc", "
Parameters
----------
shape: TopoDS_Shape

Return
-------
bool

Description
-----------
Indicates if a input shape is degenerated.
") IsDegenerated;
		Standard_Boolean IsDegenerated(const TopoDS_Shape & shape);

		/****** BRepOffsetAPI_FindContigousEdges::IsModified ******/
		/****** md5 signature: 1d5d4f025b62ca0ccc6672d39cdf22fc ******/
		%feature("compactdefaultargs") IsModified;
		%feature("autodoc", "
Parameters
----------
shape: TopoDS_Shape

Return
-------
bool

Description
-----------
Returns true if the copy of the initial shape shape was modified by the function Perform (i.e. if one or more of its edges was broken down into contiguous and non-contiguous sections). Warning Returns false if shape is not one of the initial shapes added to this algorithm.
") IsModified;
		Standard_Boolean IsModified(const TopoDS_Shape & shape);

		/****** BRepOffsetAPI_FindContigousEdges::Modified ******/
		/****** md5 signature: 8eae36e55014fa2f45331a4af35cda4c ******/
		%feature("compactdefaultargs") Modified;
		%feature("autodoc", "
Parameters
----------
shape: TopoDS_Shape

Return
-------
TopoDS_Shape

Description
-----------
Gives a modifieded shape Raises NoSuchObject if shape has not been modified.
") Modified;
		const TopoDS_Shape Modified(const TopoDS_Shape & shape);

		/****** BRepOffsetAPI_FindContigousEdges::NbContigousEdges ******/
		/****** md5 signature: c293fac1d421e2d1f7207054b4a45923 ******/
		%feature("compactdefaultargs") NbContigousEdges;
		%feature("autodoc", "Return
-------
int

Description
-----------
Returns the number of contiguous edges found by the function Perform on the shapes added to this algorithm.
") NbContigousEdges;
		Standard_Integer NbContigousEdges();

		/****** BRepOffsetAPI_FindContigousEdges::NbDegeneratedShapes ******/
		/****** md5 signature: 002576d80bfb4575f6cdfeeff5b81a1e ******/
		%feature("compactdefaultargs") NbDegeneratedShapes;
		%feature("autodoc", "Return
-------
int

Description
-----------
Gives the number of degenerated shapes.
") NbDegeneratedShapes;
		Standard_Integer NbDegeneratedShapes();

		/****** BRepOffsetAPI_FindContigousEdges::Perform ******/
		/****** md5 signature: c04b01412cba7220c024b5eb4532697f ******/
		%feature("compactdefaultargs") Perform;
		%feature("autodoc", "Return
-------
None

Description
-----------
Finds coincident parts of edges of two or more shapes added to this algorithm and breaks down these edges into contiguous and non-contiguous sections on copies of the initial shapes. The function ContigousEdge returns contiguous edges. The function Modified can be used to return modified copies of the initial shapes where one or more edges were broken down into contiguous and non-contiguous sections. Warning This function must be used once all the shapes to be checked have been added. It is not possible to add further shapes subsequently and then to repeat the call to Perform.
") Perform;
		void Perform();

		/****** BRepOffsetAPI_FindContigousEdges::SectionToBoundary ******/
		/****** md5 signature: 8753cd22e70a557633e4602d07baeefe ******/
		%feature("compactdefaultargs") SectionToBoundary;
		%feature("autodoc", "
Parameters
----------
section: TopoDS_Edge

Return
-------
TopoDS_Edge

Description
-----------
Returns the edge on the initial shape, of which the modified copy contains the edge section. section is coincident with a contiguous edge found by the function Perform. Use the function ContigousEdgeCouple to obtain a valid section. This information is useful for verification purposes, since it provides a means of determining the surface to which the contiguous edge belongs. Exceptions Standard_NoSuchObject if section is not coincident with a contiguous edge. Use the function ContigousEdgeCouple to obtain a valid section.
") SectionToBoundary;
		const TopoDS_Edge SectionToBoundary(const TopoDS_Edge & section);

};


%extend BRepOffsetAPI_FindContigousEdges {
	%pythoncode {
	__repr__ = _dumps_object

	@methodnotwrapped
	def NbEdges(self):
		pass
	}
};

/********************************
* class BRepOffsetAPI_MakeDraft *
********************************/
class BRepOffsetAPI_MakeDraft : public BRepBuilderAPI_MakeShape {
	public:
		/****** BRepOffsetAPI_MakeDraft::BRepOffsetAPI_MakeDraft ******/
		/****** md5 signature: 71eb0e38473fd7d62078ab8ae3d81222 ******/
		%feature("compactdefaultargs") BRepOffsetAPI_MakeDraft;
		%feature("autodoc", "
Parameters
----------
Shape: TopoDS_Shape
Dir: gp_Dir
Angle: float

Return
-------
None

Description
-----------
Constructs the draft surface object defined by the shape Shape, the direction Dir, and the angle Angle. Shape must be a TopoDS_Wire, Topo_DS_Face or TopoDS_Shell with free boundaries. Exceptions Standard_NotDone if Shape is not a TopoDS_Wire, Topo_DS_Face or TopoDS_Shell with free boundaries.
") BRepOffsetAPI_MakeDraft;
		 BRepOffsetAPI_MakeDraft(const TopoDS_Shape & Shape, const gp_Dir & Dir, const Standard_Real Angle);

		/****** BRepOffsetAPI_MakeDraft::Generated ******/
		/****** md5 signature: 12bed2c8d73d25dddf738c72a9352693 ******/
		%feature("compactdefaultargs") Generated;
		%feature("autodoc", "
Parameters
----------
S: TopoDS_Shape

Return
-------
TopTools_ListOfShape

Description
-----------
Returns the list of shapes generated from the shape <S>.
") Generated;
		virtual const TopTools_ListOfShape & Generated(const TopoDS_Shape & S);

		/****** BRepOffsetAPI_MakeDraft::Perform ******/
		/****** md5 signature: b03f32ebc120d00e3e8e32d44b202b9d ******/
		%feature("compactdefaultargs") Perform;
		%feature("autodoc", "
Parameters
----------
LengthMax: float

Return
-------
None

Description
-----------
Performs the draft using the length LengthMax as the maximum length for the corner edge between two draft faces.
") Perform;
		void Perform(const Standard_Real LengthMax);

		/****** BRepOffsetAPI_MakeDraft::Perform ******/
		/****** md5 signature: 3a80e47101026da2c90ae735de0ac1b9 ******/
		%feature("compactdefaultargs") Perform;
		%feature("autodoc", "
Parameters
----------
Surface: Geom_Surface
KeepInsideSurface: bool (optional, default to Standard_True)

Return
-------
None

Description
-----------
Performs the draft up to the surface Surface. If KeepInsideSurface is true, the part of Surface inside the draft is kept in the result.
") Perform;
		void Perform(const opencascade::handle<Geom_Surface> & Surface, const Standard_Boolean KeepInsideSurface = Standard_True);

		/****** BRepOffsetAPI_MakeDraft::Perform ******/
		/****** md5 signature: c18fafced10e4c987e315cfc1b3d96ad ******/
		%feature("compactdefaultargs") Perform;
		%feature("autodoc", "
Parameters
----------
StopShape: TopoDS_Shape
KeepOutSide: bool (optional, default to Standard_True)

Return
-------
None

Description
-----------
Performs the draft up to the shape StopShape. If KeepOutSide is true, the part of StopShape which is outside the Draft is kept in the result.
") Perform;
		void Perform(const TopoDS_Shape & StopShape, const Standard_Boolean KeepOutSide = Standard_True);

		/****** BRepOffsetAPI_MakeDraft::SetDraft ******/
		/****** md5 signature: 6a0b2e71733b262480aa38daaecff626 ******/
		%feature("compactdefaultargs") SetDraft;
		%feature("autodoc", "
Parameters
----------
IsInternal: bool (optional, default to Standard_False)

Return
-------
None

Description
-----------
Sets the direction of the draft for this object. If IsInternal is true, the draft is internal to the argument Shape used in the constructor.
") SetDraft;
		void SetDraft(const Standard_Boolean IsInternal = Standard_False);

		/****** BRepOffsetAPI_MakeDraft::SetOptions ******/
		/****** md5 signature: 736d57b77de1cd53364406245ccef568 ******/
		%feature("compactdefaultargs") SetOptions;
		%feature("autodoc", "
Parameters
----------
Style: BRepBuilderAPI_TransitionMode (optional, default to BRepBuilderAPI_RightCorner)
AngleMin: float (optional, default to 0.01)
AngleMax: float (optional, default to 3.0)

Return
-------
None

Description
-----------
Sets the options of this draft tool. If a transition has to be performed, it can be defined by the mode Style as RightCorner or RoundCorner, RightCorner being a corner defined by a sharp angle, and RoundCorner being a rounded corner. AngleMin is an angular tolerance used to detect whether a transition has to be performed or not. AngleMax sets the maximum value within which a RightCorner transition can be performed. AngleMin and AngleMax are expressed in radians.
") SetOptions;
		void SetOptions(const BRepBuilderAPI_TransitionMode Style = BRepBuilderAPI_RightCorner, const Standard_Real AngleMin = 0.01, const Standard_Real AngleMax = 3.0);

		/****** BRepOffsetAPI_MakeDraft::Shell ******/
		/****** md5 signature: 3ea4686086a18491532865f1cfbce9ad ******/
		%feature("compactdefaultargs") Shell;
		%feature("autodoc", "Return
-------
TopoDS_Shell

Description
-----------
Returns the shell resulting from performance of the draft along the wire.
") Shell;
		TopoDS_Shell Shell();

};


%extend BRepOffsetAPI_MakeDraft {
	%pythoncode {
	__repr__ = _dumps_object
	}
};

/**********************************
* class BRepOffsetAPI_MakeEvolved *
**********************************/
class BRepOffsetAPI_MakeEvolved : public BRepBuilderAPI_MakeShape {
	public:
		/****** BRepOffsetAPI_MakeEvolved::BRepOffsetAPI_MakeEvolved ******/
		/****** md5 signature: 10d85cbe93d42416417568f3ca2d5c30 ******/
		%feature("compactdefaultargs") BRepOffsetAPI_MakeEvolved;
		%feature("autodoc", "Return
-------
None

Description
-----------
No available documentation.
") BRepOffsetAPI_MakeEvolved;
		 BRepOffsetAPI_MakeEvolved();

		/****** BRepOffsetAPI_MakeEvolved::BRepOffsetAPI_MakeEvolved ******/
		/****** md5 signature: ca863b02acd410c7e5d5badc6d5c93f9 ******/
		%feature("compactdefaultargs") BRepOffsetAPI_MakeEvolved;
		%feature("autodoc", "
Parameters
----------
theSpine: TopoDS_Shape
theProfile: TopoDS_Wire
theJoinType: GeomAbs_JoinType (optional, default to GeomAbs_Arc)
theIsAxeProf: bool (optional, default to Standard_True)
theIsSolid: bool (optional, default to Standard_False)
theIsProfOnSpine: bool (optional, default to Standard_False)
theTol: float (optional, default to 0.0000001)
theIsVolume: bool (optional, default to Standard_False)
theRunInParallel: bool (optional, default to Standard_False)

Return
-------
None

Description
-----------
Constructs an evolved shape by sweeping the profile (theProfile) along the spine (theSpine). theSpine can be shape only of type wire or face. See description to this class for detailed information.
") BRepOffsetAPI_MakeEvolved;
		 BRepOffsetAPI_MakeEvolved(const TopoDS_Shape & theSpine, const TopoDS_Wire & theProfile, const GeomAbs_JoinType theJoinType = GeomAbs_Arc, const Standard_Boolean theIsAxeProf = Standard_True, const Standard_Boolean theIsSolid = Standard_False, const Standard_Boolean theIsProfOnSpine = Standard_False, const Standard_Real theTol = 0.0000001, const Standard_Boolean theIsVolume = Standard_False, const Standard_Boolean theRunInParallel = Standard_False);

		/****** BRepOffsetAPI_MakeEvolved::Bottom ******/
		/****** md5 signature: 25476ceb1dec30bd7775d9279e3f641c ******/
		%feature("compactdefaultargs") Bottom;
		%feature("autodoc", "Return
-------
TopoDS_Shape

Description
-----------
Return the face Bottom if <Solid> is True in the constructor.
") Bottom;
		const TopoDS_Shape Bottom();

		/****** BRepOffsetAPI_MakeEvolved::Build ******/
		/****** md5 signature: 58900897d55d51e349b2e40a091ec26f ******/
		%feature("compactdefaultargs") Build;
		%feature("autodoc", "
Parameters
----------
theRange: Message_ProgressRange (optional, default to Message_ProgressRange())

Return
-------
None

Description
-----------
Builds the resulting shape (redefined from MakeShape).
") Build;
		virtual void Build(const Message_ProgressRange & theRange = Message_ProgressRange());

		/****** BRepOffsetAPI_MakeEvolved::Evolved ******/
		/****** md5 signature: 9cd16375e762072934864900214c9cab ******/
		%feature("compactdefaultargs") Evolved;
		%feature("autodoc", "Return
-------
BRepFill_Evolved

Description
-----------
No available documentation.
") Evolved;
		const BRepFill_Evolved & Evolved();

		/****** BRepOffsetAPI_MakeEvolved::GeneratedShapes ******/
		/****** md5 signature: d6b410f91bd0b638e68b4f66ed161f82 ******/
		%feature("compactdefaultargs") GeneratedShapes;
		%feature("autodoc", "
Parameters
----------
SpineShape: TopoDS_Shape
ProfShape: TopoDS_Shape

Return
-------
TopTools_ListOfShape

Description
-----------
Returns the shapes created from a subshape <SpineShape> of the spine and a subshape <ProfShape> on the profile.
") GeneratedShapes;
		const TopTools_ListOfShape & GeneratedShapes(const TopoDS_Shape & SpineShape, const TopoDS_Shape & ProfShape);

		/****** BRepOffsetAPI_MakeEvolved::Top ******/
		/****** md5 signature: c5b73d85ae980e083fd62982344b1f23 ******/
		%feature("compactdefaultargs") Top;
		%feature("autodoc", "Return
-------
TopoDS_Shape

Description
-----------
Return the face Top if <Solid> is True in the constructor.
") Top;
		const TopoDS_Shape Top();

};


%extend BRepOffsetAPI_MakeEvolved {
	%pythoncode {
	__repr__ = _dumps_object
	}
};

/**********************************
* class BRepOffsetAPI_MakeFilling *
**********************************/
class BRepOffsetAPI_MakeFilling : public BRepBuilderAPI_MakeShape {
	public:
		/****** BRepOffsetAPI_MakeFilling::BRepOffsetAPI_MakeFilling ******/
		/****** md5 signature: 6b2c1458dee21e3098205eace85ff1c2 ******/
		%feature("compactdefaultargs") BRepOffsetAPI_MakeFilling;
		%feature("autodoc", "
Parameters
----------
Degree: int (optional, default to 3)
NbPtsOnCur: int (optional, default to 15)
NbIter: int (optional, default to 2)
Anisotropie: bool (optional, default to Standard_False)
Tol2d: float (optional, default to 0.00001)
Tol3d: float (optional, default to 0.0001)
TolAng: float (optional, default to 0.01)
TolCurv: float (optional, default to 0.1)
MaxDeg: int (optional, default to 8)
MaxSegments: int (optional, default to 9)

Return
-------
None