From 43f93b097fd39f4cba10a5ac0736f2fc6b5db61c Mon Sep 17 00:00:00 2001 From: askpatricw <4002194+askpatrickw@users.noreply.github.com> Date: Thu, 31 Dec 2020 17:50:41 -0800 Subject: [PATCH 01/14] release and pre-release FeatherS2 NSync --- .../boards/unexpectedmaker_feathers2/mpconfigboard.h | 1 - ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c | 1 + .../mpconfigboard.h | 10 ++++++++++ .../boards/unexpectedmaker_feathers2_prerelease/pins.c | 3 ++- 4 files changed, 13 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h index b68a31b9e52..e100ac118ef 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h @@ -30,7 +30,6 @@ #define MICROPY_HW_MCU_NAME "ESP32S2" #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) - #define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n") #define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c b/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c index c294fb9d3c6..191ef5ffdee 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c @@ -12,6 +12,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO13) }, { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) }, { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) }, { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO12) }, diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h index 93d901becb9..d550ff64fed 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h @@ -36,3 +36,13 @@ // #define MICROPY_HW_APA102_MOSI (&pin_GPIO40) // #define MICROPY_HW_APA102_SCK (&pin_GPIO45) + +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO38) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) + +#define DEFAULT_UART_BUS_RX (&pin_GPIO44) +#define DEFAULT_UART_BUS_TX (&pin_GPIO43) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c index a1036f8506b..d4179a2b85e 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c @@ -26,7 +26,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO5) }, { MP_ROM_QSTR(MP_QSTR_D19), MP_ROM_PTR(&pin_GPIO5) }, - { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) }, + { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) }, { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) }, { MP_ROM_QSTR(MP_QSTR_D25), MP_ROM_PTR(&pin_GPIO36) }, @@ -86,6 +86,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_GPIO40) }, // MTDO { MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_GPIO45) }, + { MP_ROM_QSTR(MP_QSTR_LDO2), MP_ROM_PTR(&pin_GPIO21) }, { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, From 220501e159998ee873bb93fba87f654bc378f4ef Mon Sep 17 00:00:00 2001 From: askpatricw <4002194+askpatrickw@users.noreply.github.com> Date: Thu, 31 Dec 2020 18:02:44 -0800 Subject: [PATCH 02/14] dupe LED entries --- ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c | 1 - ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c | 1 - 2 files changed, 2 deletions(-) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c b/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c index 191ef5ffdee..439726f5ab1 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c @@ -91,7 +91,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, - { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) }, { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, { MP_ROM_QSTR(MP_QSTR_AMB), MP_ROM_PTR(&pin_GPIO4) }, diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c index d4179a2b85e..977ec845daf 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c @@ -91,7 +91,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, - { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) }, { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, { MP_ROM_QSTR(MP_QSTR_AMB), MP_ROM_PTR(&pin_GPIO4) }, From 2ce07209dff9f509bd5f401b8eb3a1639667e680 Mon Sep 17 00:00:00 2001 From: askpatricw <4002194+askpatrickw@users.noreply.github.com> Date: Fri, 1 Jan 2021 17:23:11 -0800 Subject: [PATCH 03/14] changes based on UM's input --- ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c | 3 --- .../esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c | 3 --- 2 files changed, 6 deletions(-) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c b/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c index 439726f5ab1..7dd85215309 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c @@ -86,12 +86,9 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_GPIO40) }, // MTDO { MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_GPIO45) }, - { MP_ROM_QSTR(MP_QSTR_LDO2), MP_ROM_PTR(&pin_GPIO21) }, { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, - { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, - { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, { MP_ROM_QSTR(MP_QSTR_AMB), MP_ROM_PTR(&pin_GPIO4) }, diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c index 977ec845daf..4fb71a85df8 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c @@ -86,12 +86,9 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_GPIO40) }, // MTDO { MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_GPIO45) }, - { MP_ROM_QSTR(MP_QSTR_LDO2), MP_ROM_PTR(&pin_GPIO21) }, { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, - { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, - { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, { MP_ROM_QSTR(MP_QSTR_AMB), MP_ROM_PTR(&pin_GPIO4) }, From 9d5587fb084c3eb8ebf4f6fdd20c2b88607ad261 Mon Sep 17 00:00:00 2001 From: oon arfiandwi Date: Sat, 2 Jan 2021 04:36:18 +0000 Subject: [PATCH 04/14] Translated using Weblate (Indonesian) Currently translated at 47.2% (421 of 891 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/id/ --- locale/ID.po | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/locale/ID.po b/locale/ID.po index ca26f01bd1c..5f80f1f140b 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-12-22 22:54+0530\n" -"PO-Revision-Date: 2020-12-30 22:25+0000\n" +"PO-Revision-Date: 2021-01-03 05:29+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" "Language: ID\n" @@ -1850,11 +1850,11 @@ msgstr "Tingkat sampel dari sampel tidak cocok dengan mixer" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's signedness does not match the mixer's" -msgstr "" +msgstr "signedness dari sampel tidak cocok dengan mixer" #: shared-bindings/displayio/TileGrid.c msgid "Tile height must exactly divide bitmap height" -msgstr "" +msgstr "Tinggi tile harus persis membagi tinggi bitmap" #: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c msgid "Tile index out of bounds" @@ -1909,7 +1909,7 @@ msgstr "" #: py/obj.c msgid "Traceback (most recent call last):\n" -msgstr "" +msgstr "Traceback (bagian terakhir dari panggilan terkini):\n" #: shared-bindings/time/__init__.c msgid "Tuple or struct_time argument required" @@ -1945,15 +1945,15 @@ msgstr "Kesalahan USB" #: shared-bindings/_bleio/UUID.c msgid "UUID integer value must be 0-0xffff" -msgstr "" +msgstr "Nilai integer UUID harus 0-0xffff" #: shared-bindings/_bleio/UUID.c msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" -msgstr "" +msgstr "String UUID bukan 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" #: shared-bindings/_bleio/UUID.c msgid "UUID value is not str, int or byte buffer" -msgstr "" +msgstr "Nilai UUID bukan str, int atau byte buffer" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c @@ -1967,7 +1967,7 @@ msgstr "" #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" -msgstr "" +msgstr "Tidak dapat menemukan Tampilan I2C di %x" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c @@ -1976,15 +1976,15 @@ msgstr "Tidak dapat menemukan GCLK yang kosong" #: py/parse.c msgid "Unable to init parser" -msgstr "" +msgstr "Tidak dapat memulai parser" #: shared-module/displayio/OnDiskBitmap.c msgid "Unable to read color palette data" -msgstr "" +msgstr "Tidak dapat membaca data palet warna" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." -msgstr "" +msgstr "Tidak dapat menulis ke nvm." #: shared-bindings/alarm/SleepMemory.c msgid "Unable to write to sleep_memory." @@ -1992,7 +1992,7 @@ msgstr "" #: ports/nrf/common-hal/_bleio/UUID.c msgid "Unexpected nrfx uuid type" -msgstr "" +msgstr "Tipe urf nrfx tak sesuai" #: ports/esp32s2/common-hal/socketpool/Socket.c #, c-format From 9286f268318e316e31d836447371d07ae0e70c5c Mon Sep 17 00:00:00 2001 From: Benjamin Shockley Date: Sun, 3 Jan 2021 10:42:58 -0600 Subject: [PATCH 05/14] Added CP Dotstart Lib to Build Added the CircuitPython dotstar library to the Mini SAM M4 build so users do not have to include the library to utilize the built-in APA102 LED. --- ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk | 3 +++ 1 file changed, 3 insertions(+) diff --git a/ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk b/ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk index 393adf83975..321ee5f476a 100644 --- a/ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk +++ b/ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk @@ -15,3 +15,6 @@ LONGINT_IMPL = MPZ CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_BITBANG_APA102 = 1 + +#Include these Python libraries in firmware. +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_DotStar From 10f178d1621a31962b6f818bf73c9b00bc8b9ccd Mon Sep 17 00:00:00 2001 From: Seon Rozenblum Date: Mon, 4 Jan 2021 10:06:32 +1100 Subject: [PATCH 06/14] Fixed incorrect pin assignment on header IO13 is for blue LED IO14 is the correct pin header between IO18 and IO12 The silk is wrong (shows IO13), but hardware is correct as IO14, but IO14 was not included in pins.c Silk will be updated on next PCB production run --- .../boards/unexpectedmaker_feathers2/pins.c | 21 ++++++++++--------- .../pins.c | 21 ++++++++++--------- 2 files changed, 22 insertions(+), 20 deletions(-) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c b/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c index 7dd85215309..bef2001bac0 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/pins.c @@ -9,10 +9,9 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO18) }, { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO18) }, - { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, - { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO13) }, - { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO13) }, - { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO14) }, { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) }, { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO12) }, @@ -83,14 +82,16 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO11) }, { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO11) }, - { MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_GPIO40) }, // MTDO - { MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_GPIO45) }, + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) }, // Blue LED - { MP_ROM_QSTR(MP_QSTR_LDO2), MP_ROM_PTR(&pin_GPIO21) }, - { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_GPIO40) }, // APA102 + { MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_GPIO45) }, // APA102 - { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, - { MP_ROM_QSTR(MP_QSTR_AMB), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_LDO2), MP_ROM_PTR(&pin_GPIO21) }, // Second LDO Enable control + { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, // Second LDO Enable control + + { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, // Ambient Light Sensor + { MP_ROM_QSTR(MP_QSTR_AMB), MP_ROM_PTR(&pin_GPIO4) }, // Ambient Light Sensor { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c index 4fb71a85df8..57ac27aeb9f 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c @@ -9,10 +9,9 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO18) }, { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO18) }, - { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, - { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO13) }, - { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO13) }, - { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO14) }, { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) }, { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO12) }, @@ -83,14 +82,16 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO11) }, { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO11) }, - { MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_GPIO40) }, // MTDO - { MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_GPIO45) }, + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) }, // Blue LED - { MP_ROM_QSTR(MP_QSTR_LDO2), MP_ROM_PTR(&pin_GPIO21) }, - { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_GPIO40) }, // APA102 + { MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_GPIO45) }, // APA102 - { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, - { MP_ROM_QSTR(MP_QSTR_AMB), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_LDO2), MP_ROM_PTR(&pin_GPIO21) }, // Second LDO Enable control + { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, // Second LDO Enable control + + { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, // Ambient Light Sensor + { MP_ROM_QSTR(MP_QSTR_AMB), MP_ROM_PTR(&pin_GPIO4) }, // Ambient Light Sensor { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, From 09bf58407fc09a308154105636694b65b51cb760 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 4 Jan 2021 12:50:08 -0600 Subject: [PATCH 07/14] ulab: update to 1.6.0 This fixes several problems I encountered. --- extmod/ulab | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/extmod/ulab b/extmod/ulab index aa7e741530d..c4b06e419f3 160000 --- a/extmod/ulab +++ b/extmod/ulab @@ -1 +1 @@ -Subproject commit aa7e741530df471d206a4a321823a37a913a0eb8 +Subproject commit c4b06e419f3d515478b05bb8ce03ebdb29cddec4 From f87ce01b8f451be00a1cf9b546ecd9919cf2148c Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 4 Jan 2021 12:55:39 -0600 Subject: [PATCH 08/14] make translate --- locale/circuitpython.pot | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 880b1c74c09..f319b82f8bb 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1863,10 +1863,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" @@ -2502,6 +2498,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2812,7 +2812,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3055,6 +3055,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3284,10 +3288,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3631,6 +3631,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3640,6 +3644,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3648,10 +3656,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" From 4135ccb100779011ee9f11e6e68750f00c362aa7 Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Mon, 4 Jan 2021 21:25:02 +0100 Subject: [PATCH 09/14] Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 32 ++++++++++++++++------------ locale/cs.po | 32 ++++++++++++++++------------ locale/de_DE.po | 40 +++++++++++++++++++++------------- locale/el.po | 32 ++++++++++++++++------------ locale/es.po | 43 ++++++++++++++++++++++++------------- locale/fil.po | 35 ++++++++++++++++++------------ locale/fr.po | 46 +++++++++++++++++++++++++++------------- locale/hi.po | 32 ++++++++++++++++------------ locale/it_IT.po | 35 ++++++++++++++++++------------ locale/ja.po | 32 ++++++++++++++++------------ locale/ko.po | 32 ++++++++++++++++------------ locale/nl.po | 43 ++++++++++++++++++++++++------------- locale/pl.po | 35 ++++++++++++++++++------------ locale/pt_BR.po | 46 +++++++++++++++++++++++++++------------- locale/sv.po | 43 ++++++++++++++++++++++++------------- locale/zh_Latn_pinyin.po | 40 +++++++++++++++++++++------------- 16 files changed, 367 insertions(+), 231 deletions(-) diff --git a/locale/ID.po b/locale/ID.po index 5f80f1f140b..9fc91305ee2 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2021-01-03 05:29+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" @@ -1903,10 +1903,6 @@ msgid "Total data to write is larger than outgoing_packet_length" msgstr "" "Total data yang akan ditulis lebih besar daripada outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (bagian terakhir dari panggilan terkini):\n" @@ -2550,6 +2546,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2860,7 +2860,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3103,6 +3103,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3333,10 +3337,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3681,6 +3681,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3690,6 +3694,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3698,10 +3706,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index 88380fbea62..c72a781bee5 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-12-04 18:33+0000\n" "Last-Translator: vkuthan \n" "Language-Team: LANGUAGE \n" @@ -1865,10 +1865,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" @@ -2504,6 +2500,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2814,7 +2814,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3057,6 +3057,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3286,10 +3290,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3633,6 +3633,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3642,6 +3646,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3650,10 +3658,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 39e1071f90c..0dd71199938 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-11-26 03:11+0000\n" "Last-Translator: Daniel Bravo Darriba \n" "Language: de_DE\n" @@ -1905,10 +1905,6 @@ msgstr "" "Die Gesamtzahl der zu schreibenden Daten ist größer als " "outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Zurückverfolgung (jüngste Aufforderung zuletzt):\n" @@ -2569,6 +2565,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "Dezimalzahlen nicht unterstützt" @@ -2882,8 +2882,8 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "Das Eingabeargument muss eine Ganzzahl oder ein 2-Tupel sein" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3131,6 +3131,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3362,10 +3366,6 @@ msgstr "Operanden konnten nicht zusammen gesendet werden" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "Die Operation ist für ndarrays nicht implementiert" @@ -3714,6 +3714,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "zu viele Argumente mit dem angegebenen Format" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "zu viele Indizes" @@ -3723,6 +3727,10 @@ msgstr "zu viele Indizes" msgid "too many values to unpack (expected %d)" msgstr "zu viele Werte zum Auspacken (erwartet %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3731,10 +3739,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "Tupelindex außerhalb des Bereichs" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tupel/list hat falsche Länge" @@ -3953,6 +3957,12 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "Das Eingabeargument muss eine Ganzzahl oder ein 2-Tupel sein" + +#~ msgid "tuple index out of range" +#~ msgstr "Tupelindex außerhalb des Bereichs" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/el.po b/locale/el.po index 21a0942a6ba..acf4241d198 100644 --- a/locale/el.po +++ b/locale/el.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -1862,10 +1862,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" @@ -2501,6 +2497,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2811,7 +2811,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3054,6 +3054,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3283,10 +3287,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3630,6 +3630,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3639,6 +3643,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3647,10 +3655,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" diff --git a/locale/es.po b/locale/es.po index bac7d284053..90fbc5631b5 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-12-30 22:25+0000\n" "Last-Translator: Hugo Dahl \n" "Language-Team: \n" @@ -1912,10 +1912,6 @@ msgid "Total data to write is larger than outgoing_packet_length" msgstr "" "Los datos totales a escribir son más grandes que outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (ultima llamada reciente):\n" @@ -2567,6 +2563,10 @@ msgstr "los datos deben permitir iteración" msgid "data must be of equal length" msgstr "los datos deben ser de igual tamaño" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "números decimales no soportados" @@ -2879,8 +2879,8 @@ msgid "input and output shapes are not compatible" msgstr "Formas de entrada y salida no son compactibles" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "el argumento de entrada debe ser un entero o una tupla de par" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3125,6 +3125,10 @@ msgstr "maxiter tiene que ser > 0" msgid "maxiter should be > 0" msgstr "maxiter debe ser > 0" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3357,10 +3361,6 @@ msgstr "los operandos no se pueden transmitir juntos" msgid "operation is implemented for 1D Boolean arrays only" msgstr "operación solo está implementada para arrays booleanos de 1D" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "operación no está implementada para arrays aplanados" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "la operación no está implementada para ndarrays" @@ -3707,6 +3707,10 @@ msgstr "tobytes solo pueden ser invocados por arrays densos" msgid "too many arguments provided with the given format" msgstr "demasiados argumentos provistos con el formato dado" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "demasiados índices" @@ -3716,6 +3720,10 @@ msgstr "demasiados índices" msgid "too many values to unpack (expected %d)" msgstr "demasiados valores para descomprimir (%d esperado)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapz está definido para arreglos 1D de igual tamaño" @@ -3724,10 +3732,6 @@ msgstr "trapz está definido para arreglos 1D de igual tamaño" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "tuple index fuera de rango" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tupla/lista tiene una longitud incorrecta" @@ -3942,6 +3946,15 @@ msgstr "zi debe ser de tipo flotante" msgid "zi must be of shape (n_section, 2)" msgstr "zi debe ser una forma (n_section,2)" +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "el argumento de entrada debe ser un entero o una tupla de par" + +#~ msgid "operation is not implemented for flattened array" +#~ msgstr "operación no está implementada para arrays aplanados" + +#~ msgid "tuple index out of range" +#~ msgstr "tuple index fuera de rango" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/fil.po b/locale/fil.po index 86386cf1f36..d82731e3161 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy \n" "Language-Team: fil\n" @@ -1882,10 +1882,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (pinakahuling huling tawag): \n" @@ -2538,6 +2534,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "decimal numbers hindi sinusuportahan" @@ -2854,7 +2854,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3101,6 +3101,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3331,10 +3335,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3683,6 +3683,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "masyadong maraming mga argumento na ibinigay sa ibinigay na format" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3692,6 +3696,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "masyadong maraming values para i-unpact (umaasa ng %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3700,10 +3708,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "indeks ng tuple wala sa sakop" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "mali ang haba ng tuple/list" @@ -3920,6 +3924,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "tuple index out of range" +#~ msgstr "indeks ng tuple wala sa sakop" + #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload." #~ msgstr "" #~ "Pindutin ang anumang key upang pumasok sa REPL. Gamitin ang CTRL-D upang " diff --git a/locale/fr.po b/locale/fr.po index c25da7888ff..187ee6f92d8 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2021-01-01 04:29+0000\n" "Last-Translator: Hugo Dahl \n" "Language: fr\n" @@ -1931,10 +1931,6 @@ msgid "Total data to write is larger than outgoing_packet_length" msgstr "" "Le nombre total de données à écrire est supérieur à outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "TouchAlarm n'est pas disponible en mode someil léger" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (appels les plus récents en dernier) :\n" @@ -2597,6 +2593,10 @@ msgstr "les données doivent être les objets iterables" msgid "data must be of equal length" msgstr "les données doivent être de longueur égale" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "nombres décimaux non supportés" @@ -2912,8 +2912,8 @@ msgid "input and output shapes are not compatible" msgstr "les formes d'entrée et de sortie ne sont pas compatibles" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "l'argument d'entrée doit être un entier ou un tuple 2" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3159,6 +3159,10 @@ msgstr "maxiter doit être > 0" msgid "maxiter should be > 0" msgstr "maxiter devrait être > 0" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3390,10 +3394,6 @@ msgstr "les opérandes ne pouvaient pas être diffusés ensemble" msgid "operation is implemented for 1D Boolean arrays only" msgstr "opération implémentée que pour des tableaux 1D booléennes" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "l'opération n'est pas implémentée pour un tableau applatit" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "l'opération n'est pas implémentée sur les ndarrays" @@ -3743,6 +3743,10 @@ msgstr "tobytes ne peut être appelé que pour des tableaux dense" msgid "too many arguments provided with the given format" msgstr "trop d'arguments fournis avec ce format" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "trop d'indices" @@ -3752,6 +3756,10 @@ msgstr "trop d'indices" msgid "too many values to unpack (expected %d)" msgstr "trop de valeur à dégrouper (%d attendues)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapz n'est défini que pour des tableaux 1D de longueur égale" @@ -3760,10 +3768,6 @@ msgstr "trapz n'est défini que pour des tableaux 1D de longueur égale" msgid "trigger level must be 0 or 1" msgstr "niveau du déclencheur doit être 0 ou 1" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "index du tuple hors de portée" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tuple/liste a une mauvaise longueur" @@ -3978,6 +3982,18 @@ msgstr "zi doit être de type float" msgid "zi must be of shape (n_section, 2)" msgstr "zi doit être de forme (n_section, 2)" +#~ msgid "TouchAlarm not available in light sleep" +#~ msgstr "TouchAlarm n'est pas disponible en mode someil léger" + +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "l'argument d'entrée doit être un entier ou un tuple 2" + +#~ msgid "operation is not implemented for flattened array" +#~ msgstr "l'opération n'est pas implémentée pour un tableau applatit" + +#~ msgid "tuple index out of range" +#~ msgstr "index du tuple hors de portée" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/hi.po b/locale/hi.po index 34d0238f6b8..ba82ca8958f 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -1862,10 +1862,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" @@ -2501,6 +2497,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2811,7 +2811,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3054,6 +3054,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3283,10 +3287,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3630,6 +3630,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3639,6 +3643,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3647,10 +3655,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index dbefb87a8be..c0b2aa931f8 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin \n" "Language-Team: \n" @@ -1894,10 +1894,6 @@ msgstr "Troppi schermi" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (chiamata più recente per ultima):\n" @@ -2541,6 +2537,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "numeri decimali non supportati" @@ -2856,7 +2856,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3104,6 +3104,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3337,10 +3341,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3691,6 +3691,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "troppi argomenti forniti con il formato specificato" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3700,6 +3704,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "troppi valori da scompattare (%d attesi)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3708,10 +3716,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "indice della tupla fuori intervallo" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tupla/lista ha la lunghezza sbagliata" @@ -3928,6 +3932,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "tuple index out of range" +#~ msgstr "indice della tupla fuori intervallo" + #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload." #~ msgstr "" #~ "Premi un qualunque tasto per entrare nel REPL. Usa CTRL-D per ricaricare." diff --git a/locale/ja.po b/locale/ja.po index 6ccdc158e06..770752e9953 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-11-27 18:34+0000\n" "Last-Translator: sporeball \n" "Language-Team: none\n" @@ -1884,10 +1884,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "トレースバック（最新の呼び出しが末尾）:\n" @@ -2526,6 +2522,10 @@ msgstr "dataはイテレート可能でなければなりません" msgid "data must be of equal length" msgstr "dataは同じ長さでなければなりません" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2839,7 +2839,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3082,6 +3082,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3311,10 +3315,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "この演算はndarray上で実装されていません" @@ -3661,6 +3661,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "指定された書式に対して引数が多すぎます" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "インデクスが多すぎます" @@ -3670,6 +3674,10 @@ msgstr "インデクスが多すぎます" msgid "too many values to unpack (expected %d)" msgstr "アンパックする値が多すぎます (%d個を期待)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapzは同じ長さの1次元arrayに対して定義されています" @@ -3678,10 +3686,6 @@ msgstr "trapzは同じ長さの1次元arrayに対して定義されています" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "タプル/リストの長さが正しくありません" diff --git a/locale/ko.po b/locale/ko.po index c2272af7b09..97ede047a60 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-10-05 12:12+0000\n" "Last-Translator: Michal Čihař \n" "Language-Team: LANGUAGE \n" @@ -1865,10 +1865,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" @@ -2505,6 +2501,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2815,7 +2815,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3058,6 +3058,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3287,10 +3291,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3634,6 +3634,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3643,6 +3647,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3651,10 +3659,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index 73aeade01cd..3fce1321206 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-12-23 20:14+0000\n" "Last-Translator: _fonzlate \n" "Language-Team: none\n" @@ -1904,10 +1904,6 @@ msgstr "Teveel beeldschermen" msgid "Total data to write is larger than outgoing_packet_length" msgstr "Totale data om te schrijven is groter dan outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (meest recente call laatst):\n" @@ -2556,6 +2552,10 @@ msgstr "data moet itereerbaar zijn" msgid "data must be of equal length" msgstr "data moet van gelijke lengte zijn" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "decimale getallen zijn niet ondersteund" @@ -2869,8 +2869,8 @@ msgid "input and output shapes are not compatible" msgstr "in- en uitvoervormen zijn niet compatibel" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "invoerargument moet een integer of 2-tuple zijn" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3115,6 +3115,10 @@ msgstr "maxiter moet groter dan 0 zijn" msgid "maxiter should be > 0" msgstr "maxiter moet groter dan 0 zijn" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3344,10 +3348,6 @@ msgstr "operands konden niet samen verzonden worden" msgid "operation is implemented for 1D Boolean arrays only" msgstr "operatie is alleen geïmplementeerd voor 1D Booleaanse arrays" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "operatie is niet geïmplementeerd voor vlakke array" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "bewerking is voor ndarrays niet geïmplementeerd" @@ -3694,6 +3694,10 @@ msgstr "tobytes kunnen alleen ingeroepen worden voor gesloten arrays" msgid "too many arguments provided with the given format" msgstr "te veel argumenten opgegeven bij dit formaat" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "te veel indices" @@ -3703,6 +3707,10 @@ msgstr "te veel indices" msgid "too many values to unpack (expected %d)" msgstr "te veel waarden om uit te pakken (%d verwacht)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapz is gedefinieerd voor eendimensionale arrays van gelijke lengte" @@ -3711,10 +3719,6 @@ msgstr "trapz is gedefinieerd voor eendimensionale arrays van gelijke lengte" msgid "trigger level must be 0 or 1" msgstr "triggerniveau moet 0 of 1 zijn" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "tuple index buiten bereik" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tuple of lijst heeft onjuiste lengte" @@ -3929,6 +3933,15 @@ msgstr "zi moet van type float zijn" msgid "zi must be of shape (n_section, 2)" msgstr "zi moet vorm (n_section, 2) hebben" +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "invoerargument moet een integer of 2-tuple zijn" + +#~ msgid "operation is not implemented for flattened array" +#~ msgstr "operatie is niet geïmplementeerd voor vlakke array" + +#~ msgid "tuple index out of range" +#~ msgstr "tuple index buiten bereik" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/pl.po b/locale/pl.po index deefb878b8c..80d5cf90bdb 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-12-02 20:29+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" @@ -1876,10 +1876,6 @@ msgstr "Zbyt wiele wyświetlaczy" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Ślad wyjątku (najnowsze wywołanie na końcu):\n" @@ -2521,6 +2517,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "liczby dziesiętne nieobsługiwane" @@ -2832,7 +2832,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3075,6 +3075,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3304,10 +3308,6 @@ msgstr "operandy nie mogły być rozgłaszane razem" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3653,6 +3653,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "zbyt wiele argumentów podanych dla tego formatu" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "zbyt wiele indeksów" @@ -3662,6 +3666,10 @@ msgstr "zbyt wiele indeksów" msgid "too many values to unpack (expected %d)" msgstr "zbyt wiele wartości do rozpakowania (oczekiwano %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3670,10 +3678,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "indeks krotki poza zakresem" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "krotka/lista ma złą długość" @@ -3888,6 +3892,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "tuple index out of range" +#~ msgstr "indeks krotki poza zakresem" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 73922b3d353..43c5626b27f 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2021-01-01 04:29+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" @@ -1927,10 +1927,6 @@ msgid "Total data to write is larger than outgoing_packet_length" msgstr "" "O total dos dados que serão gravados é maior que outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "O TouchAlarm não está disponívle no modo light sleep" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (a última chamada mais recente):\n" @@ -2584,6 +2580,10 @@ msgstr "os dados devem ser iteráveis" msgid "data must be of equal length" msgstr "os dados devem ser de igual comprimento" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "os números decimais não são compatíveis" @@ -2897,8 +2897,8 @@ msgid "input and output shapes are not compatible" msgstr "as formas de entrada e saída não são compatíveis" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "o argumento da entrada deve ser um número inteiro ou uma tupla de 2" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3143,6 +3143,10 @@ msgstr "maxiter deve ser > 0" msgid "maxiter should be > 0" msgstr "maxiter pode ser > 0" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3375,10 +3379,6 @@ msgstr "os operandos não puderam ser transmitidos juntos" msgid "operation is implemented for 1D Boolean arrays only" msgstr "A operação é implementada apenas para matrizes booleanas 1D" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "a operação não é implementada para a matriz achatada" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "a operação não foi implementada nos ndarrays" @@ -3728,6 +3728,10 @@ msgstr "os tobytes podem ser invocados apenas nas matrizes densas" msgid "too many arguments provided with the given format" msgstr "Muitos argumentos fornecidos com o formato dado" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "índices demais" @@ -3737,6 +3741,10 @@ msgstr "índices demais" msgid "too many values to unpack (expected %d)" msgstr "valores demais para descompactar (esperado %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "o trapz está definido para 1D arrays de igual tamanho" @@ -3745,10 +3753,6 @@ msgstr "o trapz está definido para 1D arrays de igual tamanho" msgid "trigger level must be 0 or 1" msgstr "nível do gatilho deve ser 0 ou 1" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "o índice da tupla está fora do intervalo" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "a tupla/lista está com tamanho incorreto" @@ -3963,6 +3967,18 @@ msgstr "zi deve ser de um tipo float" msgid "zi must be of shape (n_section, 2)" msgstr "zi deve estar na forma (n_section, 2)" +#~ msgid "TouchAlarm not available in light sleep" +#~ msgstr "O TouchAlarm não está disponívle no modo light sleep" + +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "o argumento da entrada deve ser um número inteiro ou uma tupla de 2" + +#~ msgid "operation is not implemented for flattened array" +#~ msgstr "a operação não é implementada para a matriz achatada" + +#~ msgid "tuple index out of range" +#~ msgstr "o índice da tupla está fora do intervalo" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/sv.po b/locale/sv.po index 71b1c3a8660..c3d8c8a7026 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-12-28 17:59+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" @@ -1902,10 +1902,6 @@ msgstr "För många displayer" msgid "Total data to write is larger than outgoing_packet_length" msgstr "Total data som ska skrivas är större än outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (senaste anrop):\n" @@ -2551,6 +2547,10 @@ msgstr "data måste vara itererbar" msgid "data must be of equal length" msgstr "data måste vara av samma längd" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "decimaltal stöds inte" @@ -2864,8 +2864,8 @@ msgid "input and output shapes are not compatible" msgstr "indata- och utdataformer är inte kompatibla" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "indataargumentet måste vara ett heltal eller en 2-tupel" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3110,6 +3110,10 @@ msgstr "maxiter måste vara > 0" msgid "maxiter should be > 0" msgstr "maxiter bör vara > 0" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3339,10 +3343,6 @@ msgstr "operander kan inte sändas tillsammans" msgid "operation is implemented for 1D Boolean arrays only" msgstr "operationen är enbart implementerad för 1D Boolean-matriser" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "operationen inte implementeras för tillplattad matris" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "åtgärden är inte implementerad för ndarray:er" @@ -3689,6 +3689,10 @@ msgstr "tobyte kan enbart anropas för täta matriser" msgid "too many arguments provided with the given format" msgstr "för många argument för det givna formatet" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "för många index" @@ -3698,6 +3702,10 @@ msgstr "för många index" msgid "too many values to unpack (expected %d)" msgstr "för många värden att packa upp (förväntat %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapz är definierad för 1D-matriser med samma längd" @@ -3706,10 +3714,6 @@ msgstr "trapz är definierad för 1D-matriser med samma längd" msgid "trigger level must be 0 or 1" msgstr "triggernivå måste vara 0 eller 1" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "tupelindex utanför intervallet" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tupel/lista har fel längd" @@ -3924,6 +3928,15 @@ msgstr "zi måste vara av typ float" msgid "zi must be of shape (n_section, 2)" msgstr "zi måste vara i formen (n_section, 2)" +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "indataargumentet måste vara ett heltal eller en 2-tupel" + +#~ msgid "operation is not implemented for flattened array" +#~ msgstr "operationen inte implementeras för tillplattad matris" + +#~ msgid "tuple index out of range" +#~ msgstr "tupelindex utanför intervallet" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index b372b067a44..596855cf6a7 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-11-19 01:28+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -1892,10 +1892,6 @@ msgstr "Xiǎnshì tài duō" msgid "Total data to write is larger than outgoing_packet_length" msgstr "Yào xiě rù de zǒng shùjù dàyú outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (Zuìjìn yīcì dǎ diànhuà):\n" @@ -2543,6 +2539,10 @@ msgstr "shùjù bìxū shì kě diédài de" msgid "data must be of equal length" msgstr "shùjù chángdù bìxū xiāngděng" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "bù zhīchí xiǎoshù shù" @@ -2855,8 +2855,8 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "shūrù cānshù bìxū shì zhěngshù huò 2 yuán zǔ" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3099,6 +3099,10 @@ msgstr "maxiter bì xū > 0" msgid "maxiter should be > 0" msgstr "maxiter yìng wéi > 0" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3328,10 +3332,6 @@ msgstr "cāozuò shǔ bùnéng yīqǐ guǎngbò" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "cāozuò wèi zài ndarrays shàng shíxiàn" @@ -3677,6 +3677,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "tígōng jǐ dìng géshì de cānshù tài duō" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "suǒyǐn tài duō" @@ -3686,6 +3690,10 @@ msgstr "suǒyǐn tài duō" msgid "too many values to unpack (expected %d)" msgstr "dǎkāi tài duō zhí (yùqí %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "Trapz shì wèi děng zhǎng de 1D shùzǔ dìngyì de" @@ -3694,10 +3702,6 @@ msgstr "Trapz shì wèi děng zhǎng de 1D shùzǔ dìngyì de" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "yuán zǔ suǒyǐn chāochū fànwéi" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "yuán zǔ/lièbiǎo chángdù cuòwù" @@ -3912,6 +3916,12 @@ msgstr "zi bìxū wèi fú diǎn xíng" msgid "zi must be of shape (n_section, 2)" msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)" +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "shūrù cānshù bìxū shì zhěngshù huò 2 yuán zǔ" + +#~ msgid "tuple index out of range" +#~ msgstr "yuán zǔ suǒyǐn chāochū fànwéi" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" From bbd4de33d1c9b9da8984b68889428cbbeb602612 Mon Sep 17 00:00:00 2001 From: Kattni Rembor Date: Mon, 4 Jan 2021 15:53:39 -0500 Subject: [PATCH 10/14] Add adafruit_bus_device to CPX builds. --- .../atmel-samd/boards/circuitplayground_express/mpconfigboard.mk | 1 + .../boards/circuitplayground_express_crickit/mpconfigboard.mk | 1 + .../boards/circuitplayground_express_displayio/mpconfigboard.mk | 1 + 3 files changed, 3 insertions(+) diff --git a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk index 5389fc89a57..13ec9e861cb 100644 --- a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk +++ b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk @@ -21,6 +21,7 @@ SUPEROPT_GC = 0 CFLAGS_INLINE_LIMIT = 55 # Include these Python libraries in firmware. +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_HID FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH diff --git a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk index 31e10d736ce..7aa45eb39e4 100644 --- a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk +++ b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk @@ -25,6 +25,7 @@ CFLAGS_INLINE_LIMIT = 50 # Include these Python libraries in firmware. +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Crickit FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH diff --git a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk index 36b49b0eef6..3a43093a98c 100644 --- a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk +++ b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk @@ -26,6 +26,7 @@ SUPEROPT_GC = 0 CFLAGS_INLINE_LIMIT = 55 # Include these Python libraries in firmware. +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel From ce55822680b3b4005f370bbd735d50402cd48925 Mon Sep 17 00:00:00 2001 From: DavePutz Date: Mon, 4 Jan 2021 15:50:09 -0600 Subject: [PATCH 11/14] Fix size of memset in board_reset_user_neopixels() --- supervisor/shared/board.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/supervisor/shared/board.c b/supervisor/shared/board.c index 30603aa66cc..6d648510e71 100644 --- a/supervisor/shared/board.c +++ b/supervisor/shared/board.c @@ -36,7 +36,7 @@ void board_reset_user_neopixels(const mcu_pin_obj_t* pin, size_t count) { // Turn off on-board NeoPixel string uint8_t empty[count * 3]; - memset(empty, 0, count); + memset(empty, 0, count * 3); digitalio_digitalinout_obj_t neopixel_pin; common_hal_digitalio_digitalinout_construct(&neopixel_pin, pin); common_hal_digitalio_digitalinout_switch_to_output(&neopixel_pin, false, From 0057e1dc2cf9e848e7aa616f2b4c82e9f61b936a Mon Sep 17 00:00:00 2001 From: Wellington Terumi Uemura Date: Tue, 5 Jan 2021 02:27:28 +0000 Subject: [PATCH 12/14] Translated using Weblate (Portuguese (Brazil)) Currently translated at 100.0% (892 of 892 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pt_BR/ --- locale/pt_BR.po | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 43c5626b27f..3c6c5956206 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-01 04:29+0000\n" +"PO-Revision-Date: 2021-01-05 21:03+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -2582,7 +2582,7 @@ msgstr "os dados devem ser de igual comprimento" #: extmod/ulab/code/ndarray.c msgid "data type not understood" -msgstr "" +msgstr "o tipo do dado não foi compreendido" #: py/parsenum.c msgid "decimal numbers not supported" @@ -2898,7 +2898,7 @@ msgstr "as formas de entrada e saída não são compatíveis" #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer, a tuple, or a list" -msgstr "" +msgstr "argumento da entrada deve ser um número inteiro, uma tupla ou uma lista" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3145,7 +3145,7 @@ msgstr "maxiter pode ser > 0" #: extmod/ulab/code/numerical/numerical.c msgid "median argument must be an ndarray" -msgstr "" +msgstr "o argumento mediano deve ser um ndarray" #: py/runtime.c #, c-format @@ -3730,7 +3730,7 @@ msgstr "Muitos argumentos fornecidos com o formato dado" #: extmod/ulab/code/ulab_create.c msgid "too many dimensions" -msgstr "" +msgstr "dimensões demais" #: extmod/ulab/code/ndarray.c msgid "too many indices" @@ -3743,7 +3743,7 @@ msgstr "valores demais para descompactar (esperado %d)" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays" -msgstr "" +msgstr "Trapz está definido para arrays 1D" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" From 794327254e4c80a5d3c462b16a82d8ede1c1da6a Mon Sep 17 00:00:00 2001 From: Jonny Bergdahl Date: Mon, 4 Jan 2021 21:13:33 +0000 Subject: [PATCH 13/14] Translated using Weblate (Swedish) Currently translated at 100.0% (892 of 892 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/sv/ --- locale/sv.po | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/locale/sv.po b/locale/sv.po index c3d8c8a7026..6a19dc5ad55 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2020-12-28 17:59+0000\n" +"PO-Revision-Date: 2021-01-05 21:03+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -21,12 +21,16 @@ msgid "" "\n" "Code done running.\n" msgstr "" +"\n" +"Koden har kört klart.\n" #: main.c msgid "" "\n" "Code stopped by auto-reload.\n" msgstr "" +"\n" +"Koden stoppades av auto-omladdning.\n" #: supervisor/shared/safe_mode.c msgid "" @@ -546,15 +550,16 @@ msgstr "Anropa super().__init__() innan du använder det ursprungliga objektet." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on RTC IO from deep sleep." -msgstr "" +msgstr "Kan bara larma på RTC-IO från djupsömn." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on one low pin while others alarm high from deep sleep." msgstr "" +"Kan bara larma från djup sömn på låg för en pinne medan andra larmar på hög." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on two low pins from deep sleep." -msgstr "" +msgstr "Kan bara larma från djup sömn på två låga pinnar." #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "Can't set CCCD on local Characteristic" @@ -591,7 +596,7 @@ msgstr "Det går inte att mata ut båda kanalerna på samma pinne" #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Cannot pull on input-only pin." -msgstr "" +msgstr "Kan bara använda pull på pinne för input." #: shared-module/bitbangio/SPI.c msgid "Cannot read without MISO pin." @@ -639,7 +644,7 @@ msgstr "Det går inte att ändra frekvensen på en timer som redan används" #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Cannot wake on pin edge. Only level." -msgstr "" +msgstr "Kan inte vakna på nivåskift, enbart nivå." #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." @@ -1509,7 +1514,7 @@ msgstr "Endast ett alarm.time kan ställas in." #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c msgid "Only one alarm.touch alarm can be set." -msgstr "" +msgstr "Endast ett larm av typ alarm.touch kan ställas in." #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" @@ -1621,7 +1626,7 @@ msgstr "" #: main.c msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" -msgstr "" +msgstr "Fingerar djup sömn tills larm, Ctrl-C eller filskrivning.\n" #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." @@ -2549,7 +2554,7 @@ msgstr "data måste vara av samma längd" #: extmod/ulab/code/ndarray.c msgid "data type not understood" -msgstr "" +msgstr "datatyp inte förstådd" #: py/parsenum.c msgid "decimal numbers not supported" @@ -2865,7 +2870,7 @@ msgstr "indata- och utdataformer är inte kompatibla" #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer, a tuple, or a list" -msgstr "" +msgstr "indataargument måste vara integer, en tuple eller list" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3112,7 +3117,7 @@ msgstr "maxiter bör vara > 0" #: extmod/ulab/code/numerical/numerical.c msgid "median argument must be an ndarray" -msgstr "" +msgstr "argumentet median måste vara en ndarray" #: py/runtime.c #, c-format @@ -3691,7 +3696,7 @@ msgstr "för många argument för det givna formatet" #: extmod/ulab/code/ulab_create.c msgid "too many dimensions" -msgstr "" +msgstr "för många dimensioner" #: extmod/ulab/code/ndarray.c msgid "too many indices" @@ -3704,7 +3709,7 @@ msgstr "för många värden att packa upp (förväntat %d)" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays" -msgstr "" +msgstr "trapz är definierat för 1D-matriser" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" From 9eb2ca02a57cea7ed44f3e144e446cab15a90354 Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Tue, 5 Jan 2021 22:03:19 +0100 Subject: [PATCH 14/14] Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/pt_BR.po | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 3c6c5956206..f399ade1678 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -2898,7 +2898,8 @@ msgstr "as formas de entrada e saída não são compatíveis" #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer, a tuple, or a list" -msgstr "argumento da entrada deve ser um número inteiro, uma tupla ou uma lista" +msgstr "" +"argumento da entrada deve ser um número inteiro, uma tupla ou uma lista" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2"